Leak Detection · Berlin & Surrounding Area

Leak detection in Berlin: Finding the source of a leak without breaking open walls

Is your water meter running even though all the taps are turned off? Is your heating system losing pressure, or has a stain appeared on the ceiling? We use precision measurement techniques to locate leaks in drinking water, heating, and underfloor heating pipes—ensuring that any necessary repairs are targeted exactly where the leak is located.

  • Thermography, electroacoustics, tracer gas, and moisture measurement
  • Locating usually carried out in a single appointment; report provided for insurance purposes
  • Old buildings, prefabricated housing, new developments – in all of Berlin’s districts

Available around the clock · Appointments throughout Berlin and the surrounding area

Wärmebild zeigt eine Leckstelle in der Wand einer Berliner Wohnung
Root cause instead of symptomNarrowing down via measurement before opening
Report for the insurance companyPhotos, measurements, clinical findings
Available around the clockEmergencies, including at night and on weekends
On-site in BerlinLocation in Charlottenburg-Wilmersdorf

When you need us

Typical signs of a hidden leak

A leak in a pipe is rarely immediately visible. It usually makes itself known indirectly—and the sooner it is discovered, the less damage it will cause. Give us a call if you notice any of these signs:

  • The water meter is spinning, even though no water is being drawn.
  • The heating system is losing pressure and requires constant refilling.
  • Damp patches, flaking paint, or swollen skirting boards on walls, ceilings, or floors.
  • A musty smell or mold in areas that otherwise do not get wet.
  • The neighbor below you reports water on the ceiling.
  • Unusually high water bill from the Berlin water utility (Berliner Wasserbetriebe).

Please do not knock off tiles on a hunch: without taking measurements, you will often end up in the wrong spot—and later on, your insurance company will ask why you did it.

Wasserfleck an der Zimmerdecke durch ein verstecktes Leck

Measurement methods

Methods we use to locate leaks

No single procedure is suitable for every type of damage. We combine methods in such a way that the results corroborate one another:

ProceedingsWhat it is suitable for
Thermography (thermal imaging)Hot water and heating pipes, underfloor heating, moisture distribution on walls and ceilings
ElectroacousticPressurized pipes beneath screed and tiles – escaping water creates a sound that we track using ground microphones.
Tracer Gas (Forming Gas)Very small or deeply located leaks: a harmless tracer gas escapes at the leak site and is detected at the surface
Pressure testIdentify which pipeline section is affected (cold water, hot water, circulation, heating circuit)
Moisture measurementExtent of moisture penetration in screed, insulation, and masonry – the basis for drying
Endoscope / CameraInspection of cavities, shafts, and sewer pipes without the need for extensive opening

The result is a marked spot where an opening can be made in a targeted manner—in many cases, by cutting into tiles or the floor screed, with an opening ranging from about the width of a hand to half a meter.

Wärmebildkamera zeigt den Verlauf einer warmen Wasserleitung in der Wand

Berlin Practice

Leak detection in older buildings, prefabricated structures, and new builds

Period buildings from the Wilhelminian era (e.g., in Charlottenburg, Wilmersdorf, Friedenau, Kreuzberg, or Prenzlauer Berg) feature timber-joist floor structures with loose-fill insulation. Water can travel laterally within these structures before breaking through to the level below. We therefore take measurements in both apartments and trace the path back to the source—often a leaking connection at a bathtub, shower, or toilet on the floor above.

Prefabricated apartment blocks (e.g., in Marzahn-Hellersdorf, Lichtenberg, or Hohenschönhausen): Supply and drainage pipes are grouped together in a utility shaft located behind the bathroom. A leak in this area often affects multiple apartments stacked one above the other. We use pressure testing and acoustic analysis to pinpoint which specific pipe run and floor are affected.

New builds and renovated homes: Underfloor heating, press-fit connections, and pipes embedded in the screed. In these cases, thermal imaging and tracer gas can help locate issues without having to tear up the entire floor. Learn more in our guide: Leaking underfloor heating.

Wärmebild einer Fußbodenheizung bei der Leckortung

Sequence

Procedure in Berlin

  1. Brief phone call

    We will clarify the symptoms, the type of building, and the level of urgency, and advise you on what you can do in the meantime before your appointment.

  2. Delimitation

    Visual inspection, moisture measurement, and pressure testing reveal which section of the piping is leaking.

  3. Precise localization

    Thermal imaging, acoustics, or tracer gas are used to pinpoint the leak; we then mark its location on-site.

  4. Report & next steps

    You will receive an assessment, photographs, and a recommendation – upon request, we can also handle the opening, repair, and drying process.

Is water leaking out right now?

Close the main water tap or shut-off valve, switch off the electricity in the affected rooms (only from a dry location), take photographs of the damage – and then give us a call. We will advise you over the phone on the best steps to take until we arrive.

030 814562308

Area of ​​application

Leak detection throughout Berlin and the surrounding area

We offer leak detection services across all twelve districts of Berlin; from our base in Westend, we can reach any location quickly via the A100, A111, and Heerstraße—the same applies to the neighboring municipalities in Brandenburg.

Karte von Berlin mit allen 12 Bezirken – Einsatzgebiet von Leckage Berlin, Standort in Westend (Charlottenburg-Wilmersdorf)
All 12 districts – location at Reichsstraße 36, Westend

Berlin Districts

  • Charlottenburg-Wilmersdorf
  • Spandau
  • Steglitz-Zehlendorf
  • Tempelhof-Schöneberg
  • Mitte
  • Friedrichshain-Kreuzberg
  • Pankow
  • Reinickendorf
  • Neukölln
  • Treptow-Köpenick
  • Lichtenberg
  • Marzahn-Hellersdorf

Surrounding area (Brandenburg)

  • Potsdam
  • Falkensee
  • Kleinmachnow & Teltow
  • Stahnsdorf
  • Dallgow-Döberitz
  • Hennigsdorf
  • Oranienburg
  • Bernau bei Berlin
  • Hoppegarten
  • Schönefeld
  • Königs Wusterhausen
  • Ludwigsfelde

Do you live a bit further out? Just give us a call – often, an appointment can still be arranged.

FAQ

Questions about leak detection in Berlin

How long does a leak detection take?

In an apartment, it usually takes one to three hours. In cases involving underfloor heating, large commercial spaces, or multiple affected floors, it may take longer. We will let you know in advance what to expect.

Is leak detection truly non-destructive?

The locating process itself, yes—that is done from the outside. For the repair, the pipe naturally has to be uncovered, but only at one specific point and in an appropriately sized area.

Is tracer gas dangerous?

No. We use forming gas (95% nitrogen, 5% hydrogen). It is non-toxic, non-flammable in this mixture, and dissipates without leaving any residue. This method has been the standard for drinking water pipes for years.

Will the insurance cover the costs?

In the case of damage caused by tap water, the answer is generally yes—covered by your residential building insurance, which typically also covers the costs of locating and exposing the source of the damage. The specific terms of your policy are what determine coverage. Our report, which includes measurements and photographs, serves as the basis for this.

Can you also find leaks in the heating system?

Yes. A loss of pressure in a heating system is one of the most common reasons for conducting a leak detection. We inspect radiator connections, manifolds, pipes embedded in the screed, and underfloor heating systems.

What happens after the location is determined?

You will receive the assessment and can hire a plumber yourself – or you can let us coordinate the opening, repair, and subsequent structural drying.

Inquiry

Request leak detection in Berlin

Please briefly describe where moisture or water is visible and how long it has been present. We will call you back to discuss the next steps and arrange an appointment. In the event of an active water leak, please call us immediately.