Mold · Damp · Root Cause Analysis

Mold in Berlin: identify the cause first, then remediate

Mold is not a cleaning issue; it is a moisture problem. Measurements can reveal whether the cause is a leak in the wall, a thermal bridge at a window, or insufficient air exchange. We identify the source, provide an objective assessment, and carry out remediation in a way that ensures the mold does not return.

  • Moisture measurement, thermal imaging, and indoor climate data
  • Neutral assessment – ​​helpful in disputes between tenant and landlord
  • Professional renovation with protective measures

Available around the clock · Appointments throughout Berlin and the surrounding area

Feuchtemessung an einer Decke mit Schimmelflecken in einer Berliner Wohnung
Root cause instead of symptomNarrowing down via measurement before opening
Report for the insurance companyPhotos, measurements, clinical findings
Available around the clockEmergencies, including at night and on weekends
On-site in BerlinLocation in Charlottenburg-Wilmersdorf

Causes

Where the moisture comes from

Mold spores are everywhere. They can only grow where there is persistent moisture. In Berlin apartments, we primarily encounter three causes:

  • Leaks in water, heating, or sewage pipes – often going unnoticed behind tiles, in shafts, or beneath the floor.
  • Thermal bridges at external corners, window reveals, roller shutter boxes, and balcony slabs—typical in unrenovated older buildings and older prefabricated structures. In these areas, the wall cools down to such an extent that the moisture in the indoor air condenses.
  • Usage and ventilation – new, airtight windows without adapted ventilation habits, drying laundry indoors, and furniture placed close against exterior walls.

In addition, there is the issue of rising damp and water penetrating basements from the sides. Identifying the underlying cause determines the appropriate remediation method—and often also who ends up paying for it.

Thermografie am Fenster zeigt eine Wärmebrücke als Schimmelursache

Assessment

How we investigate mold damage

We measure material moisture across surfaces and at depth, check surface temperatures using a thermal imaging camera, and compare these against room temperature and humidity levels. If a leak is suspected, we also pinpoint the exact location of the pipework. Upon request, data loggers can be used to record the indoor climate over a period of one to two weeks.

The result is a written report containing photographs, measurements, and the identified cause—presented objectively and without taking sides. This is particularly valuable in landlord-tenant relationships, where both parties may disagree on the underlying cause of an issue.

Note: If mold is present in homes where small children, pregnant women, elderly individuals, or people with weakened immune systems reside, action should be taken promptly. Please consult your doctor regarding any health-related concerns.

Feuchtemessung an einer Wand

Renovation

Remove mold professionally

Wiping surfaces down with vinegar or bleach only removes the visible layer. We address the root cause and the full extent of the issue:

  • Eliminate the cause: repair the leak, dry out the component, mitigate the thermal bridge, or adjust the ventilation strategy.
  • Isolate the affected area; avoid creating dust.
  • Remove affected plaster, wallpaper, and silicone surfaces instead of painting over them
  • Treat the substrate and rebuild it—using vapor-permeable, mold-resistant materials if necessary.
  • Final verification measurement

You can often remove small, superficial stains yourself – we’ll be honest with you about when that’s sufficient.

Sequence

Procedure in Berlin

  1. Initial consultation

    Where, how big, and for how long? Photos sent via email help with the assessment.

  2. On-site measurement

    Material moisture, surface temperature, indoor climate, and, if applicable, leak detection.

  3. Findings

    Cause, scope, and remediation proposal in writing.

  4. Remediation & Control

    Professional removal, drying, and follow-up measurement.

Mold following water damage?

In that case, rapid drying is crucial. Give us a call – we will assess the extent of the moisture and identify the cause before an infestation can spread.

030 814562308

Area of ​​application

Mold assessment throughout Berlin and the surrounding area

We offer mold assessments in all twelve districts of Berlin; from our base in Westend, we can quickly reach any location via the A100, A111, and Heerstraße—as well as in the neighboring municipalities in Brandenburg.

Karte von Berlin mit allen 12 Bezirken – Einsatzgebiet von Leckage Berlin, Standort in Westend (Charlottenburg-Wilmersdorf)
All 12 districts – location at Reichsstraße 36, Westend

Berlin Districts

  • Charlottenburg-Wilmersdorf
  • Spandau
  • Steglitz-Zehlendorf
  • Tempelhof-Schöneberg
  • Mitte
  • Friedrichshain-Kreuzberg
  • Pankow
  • Reinickendorf
  • Neukölln
  • Treptow-Köpenick
  • Lichtenberg
  • Marzahn-Hellersdorf

Surrounding area (Brandenburg)

  • Potsdam
  • Falkensee
  • Kleinmachnow & Teltow
  • Stahnsdorf
  • Dallgow-Döberitz
  • Hennigsdorf
  • Oranienburg
  • Bernau bei Berlin
  • Hoppegarten
  • Schönefeld
  • Königs Wusterhausen
  • Ludwigsfelde

Do you live a bit further out? Just give us a call – often, an appointment can still be arranged.

FAQ

Questions regarding mold in Berlin apartments

Who is responsible when there is mold in a rented apartment?

That depends on the cause: structural defects or leaks are generally the landlord’s responsibility, while improper heating or ventilation habits are the tenant’s responsibility. A technical assessment can provide clarity here. We cannot offer legal advice—that is a matter for tenants' associations, property owners' associations, or a lawyer.

Is it enough to wipe away the mold?

Sometimes, in the case of very small, superficial areas. If it recurs, or if the affected area is larger than about the size of a palm, the underlying cause should be investigated.

How long does mold remediation take?

Small areas can often be completed in a single day. If drying is required beforehand, the duration is extended by the drying time.

Do you also perform airborne microbial measurements?

Our primary focus is identifying the cause of the moisture. If a microbiological analysis is required, we will commission an accredited laboratory—or advise you on when such an analysis would be appropriate.

Is mold behind furniture normal?

Not always, but quite often: furniture placed against cold exterior walls hinders air circulation. Leaving a gap of about five to ten centimeters is often enough to help.

Inquiry

Request a mold assessment in Berlin

Please briefly describe where moisture or water is visible and how long it has been present. We will call you back to discuss the next steps and arrange an appointment. In the event of an active water leak, please call us immediately.